Solomon Islands Tsunami on Nov. 22, 2022

 

We have simulated the tsunami generated from the Solomon Islands earthquake (9.812°S, 159.596°E, depth = 15.0 km, M = 7.0 at 02:03:07 UTC according to USGS) on November 22, 2022 (Fig. 1). The assumed tsunami source is shown with the aftershocks (Fig. 1). The fault length and width are 30 km x 15 km. The focal mechanism is strike:261°, dip:81°, slip:-80° from the USGS's W-phase moment tensor solution. The top depth of the fault was assumed to 10 km. The average slip on the fault is 1.5 m. The seismic moment is 3.4 x 10¹⁹ Nm (Mw = 7.0) assuming the rigidity of 5 x 10¹⁰ N/m². As the initial condition for tsunami, static deformation of the seafloor is calculated for a rectangular fault model [Okada, 1985] using the source model. The used bathymetry data is the 15 arc-second grid data from GEBCO_2022, which was resampled to 12 arc-second grid data. To calculate tsunami propagation, the linear shallow-water, or long-wave, equations were numerically solved by using a finite-difference method [Satake, 1995]. We have downloaded the DART data and Tide gauge data from NOAA's and UNESCO/IOC's web sites, respectively, and compared the simulated tsunami waveforms and the observed ones (Fig. 2). We can see the tsunami propagation in the Solomon Sea, Coral Sea and Pacific ocean (Fig. 3).

 

Fig.1 Tsunami Source Model
The red lines indicate uplift with the contour interval of 0.05 m, while the blue dotted lines indicate subsidence with the contour interval of 0.05 m. Aftershocks determined by USGS are shown by red circles. The focal mechanism determined by USGS is also shown.

 

Fig.2 Maximum Height of Simulated Tsunami and Tsunami Waveforms
Solid lines in red and blue indicate the observed tsunami waveforms and synthtic ones, respectively.

 

Fig.3 Tsunami Propagation (Click to start animation)
The red color means that the water surface is higher than normal sea level, while the blue means lower.

 

by Yushiro Fujii (IISEE, BRI) and Kenji Satake (ERI, Univ. of Tokyo)

References

Okada, Y. (1985), Surface Deformation Due to Shear and Tensile Faults in a Half-Space, Bull. Seismol. Soc. Am., 75, 1135-1154. Satake, K. (1995), Lincd ear and Nonlinear Computations of the 1992 Nicaragua Earthquake Tsunami, Pure and Appl. Geophys., 144, 455-470. GEBCO Compilation Group (2022), GEBCO_2022 Grid (doi:10.5285/e0f0bb80-ab44-2739-e053-6c86abc0289c).

Last Updated on 2022/11/22